ELAPRO GmbH & Co. KG
ELAPRO synthetic liquids – for waterproofing and coating
ELAPRO synthetic liquids
System solutions for waterproofing and coating flat roofs, balconies and buildings
ELAPRO develops and manufactures synthetic liquid systems for the durable waterproofing and coating of flat roofs, balconies and buildings.
Our single-component products and system components are designed for a wide range of applications and requirements and can be applied reliably, quickly and safely.
Our product range includes solutions for waterproofing, coating and repairs, as well as coordinated system components for different substrates and application conditions.
Do you have any questions about our products or need support with your project? Send us a message – we will be happy to help.
ELAPRO 1k-SIL blu
Single-component synthetic liquid –
vapour-permeable and certified with the Blue Angel (DE-UZ 233).
ELAPRO 1k-SIL
Single-component synthetic liquid – weather-flexible, vapour-permeable and reliably curing near freezing.
ELAPRO 1k-CRYL
Single-component synthetic liquid – economical, alkali-resistant and suitable for application on mineral substrates with residual moisture.
ELAPRO Topcoat
Single-component liquid coating for traffic and wear surfaces – mechanically resistant.
ELAPRO QuickRepair
Fibre-reinforced single-component repair coating – fleece-free for quick and emergency repairs.
ELAPRO MD FlexSeal A + B
Highly flexible two-component waterproofing slurry for structures in contact with the ground.
ELAPRO MD HardSeal
High-strength single-component protective slurry for concrete and masonry surfaces.
ELAPRO MD DeepSeal
Crystalline single-component protective slurry for concrete and masonry surfaces.
ELAPRO MD BaseLevel
Self-levelling single-component levelling compound for concrete and screed surfaces.
ELAPRO Primer KS
Primer for plastic-based substrates.
ELAPRO Primer UN
Primer for mineral and metal substrates.
ELAPRO Primer BE
Bonding and deep primer for mineral substrates – primarily for indoor use.
ELAPRO QuickDry
Curing accelerator for ELAPRO 1k-SIL and ELAPRO 1k-SIL blu.
ELAPRO Fleece 110
Perforated, quickly saturating fleece insert for surfaces and details.
ELAPRO Fleece – corners
Quickly saturating, tear-resistant fleece corners for internal and external corners.
ELAPRO Fleece – pipe sleeves
Quickly saturating fleece inserts for sealing pipe penetrations.
ELAPRO SFB
Butt joint tape for covering beneath fleece joints to create level traffic and walking surfaces.
ELAPRO D110
Waterproof sealing tape for joints and component connections.
ELAPRO Cleaner
Cleaner for metals, synthetic membranes, rigid PVC, as well as tools and machinery.
ELAPRO Chips
Colour chips for decorative and
slip-resistant traffic and walking surfaces
with ELAPRO Topcoat.
ELAPRO Q712
Quartz sand for slip-resistant traffic and walking surfaces with ELAPRO Topcoat.
Certificates, labels & further evidence
EPD
Institut Bauen und Umwelt e.V.
BLUE ANGEL
RAL gGmbH
EMICODE®
GEV
DGNB Navigator
DGNB GmbH
QNG ready
Sentinel Holding Institut GmbH
Green electricity
Vattenfall Europe Sales GmbH
Product documents – currently available on request
Our product information, technical documentation and certificates are currently being updated. Once the update is complete, the documents will again be available for individual download as usual.
Do you need product information, technical documentation or certificates before then? Simply send us a short message via the contact form and let us know which application area and ELAPRO products you are interested in. We will put together the relevant documents and send them to you by email or via a download link.
Certificates & Catalogues
Environmental Product Declarations (EPDs)
SHI Product passports
Produktkataloge
System
Contact form
„(required)“ zeigt erforderliche Felder an
ELAPRO 1k-SIL
Waterproofing
Material properties
| Characteristics | Description |
|---|---|
| System basis | Silane-terminated polyurethane |
| Hardening | Humidity |
| Viscosity | Viscous, set thixotropic |
| Density | Approx. 1.4 g/cm³ |
| Stability in storage | At least 12 months |
| Storage | cool, frost-free, dry and airtight |
| Metal can | 6 kg/12 kg |
| Standard colour(s) | Anthracite grey (ca. RAL 7016) / silver grey (ca. RAL 7001) |
Processing-relevant data
| Characteristics | Description |
|---|---|
| Processing temperature | 0 to +40°C |
| Substrate temperature | 0 to +60°C, min. 3°C above the dew point |
| Relative humidity | Dry to slightly damp |
| Consumption | Min. 3.3 kg/m² |
| Disposal | Information on the disposal of product residues and packaging can be found in the Technical Data Sheet. Regional disposal regulations must be observed. |
Test certificates
| Test certificates | Description |
|---|---|
| European Technical Assessment based on EAD 030350-00-0402 | ETA-19/0623 |
| - Working life | W3 (25 years) |
| - Climate zone | M and S |
| - Payloads | P1-P4 |
| - Roof pitch | S1-S4 |
| - Surface temperature | TL4:TH4 (min:max) |
| Reaction to fire (DIN 4102-1 and EN 13501-1) | Class E |
| External fire performance (DIN 4102-7 and EN 13501-5) | Class BROOF(t1) |
| Building waterproofing | PG-FLK P-1202/812/20 MPA-BS |
| - Water pressing from the outside | 3 m |
| - Water pressing from the inside | 10 m |
| Root resistance | FLL test / DIN EN 13948, root-resistant |
| EMICODE® EC 1PLUS | Licence No. 15468 |
| Ecotoxicologically tested | Test report 04/21102 1a |
ELAPRO 1k-SIL is solvent-free in accordance with EMICODE®, certified as “very low emission” with EMICODE® EC 1PLUS and does not require hazard pictograms under the CLP Regulation.
ELAPRO 1k-SIL blu
Waterproofing
Material properties
| Characteristics | Description |
|---|---|
| System basis | Silane-terminated polyurethane |
| Hardening | Humidity |
| Viscosity | Viscous, set thixotropic |
| Density | Approx. 1.4 g/cm³ |
| Stability in storage | At least 12 months |
| Storage | Cool, frost-free, dry and airtight |
| Plastic container | 7 kg |
| Standard colour(s) | Slate grey (ca. RAL 7015) |
Processing-relevant data
| Characteristics | Description |
|---|---|
| Processing temperature | 0 to +40°C |
| Substrate temperature | 0 to +60°C, min. 3°C above the dew point |
| Relative humidity | Dry to slightly damp |
| Consumption | Min. 3.3 kg/m² |
| Disposal | Information on the disposal of product residues and packaging can be found in the Technical Data Sheet. Regional disposal regulations must be observed. |
Test certificates
| Test certificates | Description |
|---|---|
| European Technical Assessment based on EAD 030350-00-0402 | ETA-24/0110 |
| - Working life | W3 (25 years) |
| - Climate zone | M and S |
| - Payloads | P1-P4 |
| - Roof pitch | S1-S4 |
| - Surface temperature (min):(max) | TL4:TH4 (min:max) |
| Reaction to fire (DIN 4102-1 and DIN EN 13501-1) | Class E |
| External fire performance (DIN 4102-7 and EN 13501-5) | Class BROOF(t1) |
| Building waterproofing | PG-FLK P-1202/812/20 MPA-BS |
| - Water pressing from the outside | 3 m |
| - Water pressing from the inside | 10 m |
| Blue Angel DE-UZ 233 | awarded |
| EMICODE® EC 1PLUS | Licence No. 18008 |
| Ecotoxicologically tested | Test report 04/21102 1a |
ELAPRO 1k-SIL blu carries the Blue Angel in accordance with DE-UZ 233, is solvent-free in accordance with EMICODE®, certified as “very low emission” with EMICODE® EC 1PLUS and does not require hazard pictograms under the CLP Regulation.
ELAPRO Topcoat
Coating
Material properties
| Characteristics | Description |
|---|---|
| System basis | Silane-terminated polyurethane |
| Hardening | Humidity |
| Density | Viscous, set thixotropic |
| Dichte | Approx. 1.4 g/cm³ |
| Stability in storage | At least 12 Monate |
| Storage | Cool, frost-free, dry and airtight |
| Metal can | 12 kg |
| Standard colour(s) | Telegrey 2 (RAL 7046) / Light grey (RAL 7035) |
Processing-relevant data
| Characteristics | Description |
|---|---|
| Processing temperature | +5 to +40°C |
| Substrate temperature | +5 to +60°C, min. 3°C above the dew point |
| Relative humidity | Dry to slightly damp |
| Consumption | Min. 3,0 kg/m² |
| Disposal | Information on the disposal of product residues and packaging can be found in the Technical Data Sheet. Regional disposal regulations must be observed. |
Test certificates
| Test certificates | Description |
|---|---|
| Reaction to fire (DIN 4102-1 and EN 13501-1) | Class E |
| Slip resistance – DIN EN 16165:2021-12 Annex B, DGUV Test | |
| – without decorative finish | R9 – Certificate No. IFA 2204137 |
| – with ELAPRO Chips (approx. 70 g/m²) | R10 – Certificate No. IFA 2204139 |
| – with ELAPRO Q712 quartz sand (approx. 1.55 kg/m²) | R11 – Certificate No. IFA 2204138 |
| EMICODE® EC 1PLUS | Licence No. 15469 |
ELAPRO Topcoat is solvent-free in accordance with EMICODE®, certified as “very low emission” with EMICODE® EC 1PLUS and does not require hazard pictograms under the CLP Regulation.
ELAPRO 1k-CRYL
Waterproofing
Material properties
| Characteristics | Description |
|---|---|
| System basis | Polyester resin / Polyacrylate |
| Hardening/crosslinking | Air drying and self-curing |
| Viscosity | Viscous, thixotropic |
| Density | Approx. 1.4 g/cm³ |
| Stability in storage | At least 24 months |
| Storage | cool, frost-free, dry and airtight |
| Plastic container | 5 kg/10 kg |
| Standard colour(s) | Black (ca. RAL 9005) / silk grey (ca. RAL 7044) |
Processing-relevant data
| Characteristics | Description |
|---|---|
| Relative humidity | 0 to 75% |
| Characteristics | Description |
| Processing temperature | +10 to +35 °C |
| Substrate temperature | +5 to +60°C, min. 3°C above the dew point |
| Relative humidity | Dry to slightly damp |
| Consumption | Min. 3.5 kg/m² |
| Disposal | Information on the disposal of product residues and packaging can be found in the Technical Data Sheet. Regional disposal regulations must be observed. |
Test certificates
| Test certificates | Description |
|---|---|
| European Technical Assessment based on EAD 030350-00-0402 | ETA-18/0987 |
| - Working life | W3 (25 Jahre) |
| - Climate zone | M and S |
| - Payloads | P1-P4 |
| - Roof pitch | S1-S4 |
| - Surface temperature | TL4:TH3 (min:max) |
| Reaction to fire (DIN 4102-1 and EN 13501-1) | Class E |
| External fire performance (DIN 4102-7 and EN 13501-5) | Class BROOF(t1) |
| Ecotoxicologically tested | Test report 04/21102 1b |
ELAPRO QuickRepair
Repair coating
Material properties
| Characteristics | Description |
|---|---|
| System basis | Silane-terminated polyurethane |
| Hardening | Humidity |
| Viscosity | Viscous, thixotropic |
| Density | Approx. 1.4 g/cm³ |
| Stability in storage | At least 12 months |
| Storage | cool, frost-free, dry and airtight |
| Metal can | 1 kg/4.5 kg |
| Standard colour | Stone grey (ca. RAL 7030) |
Processing-relevant data
| Characteristics | Description |
|---|---|
| Processing temperature | -5 to +40°C |
| Substrate temperature | -5 to +60°C, min. 3°C above the dew point |
| Relative humidity | Dry to slightly damp |
| Consumption | Min. 1.5 kg/m² |
| Disposal | Information on the disposal of product residues and packaging can be found in the Technical Data Sheet. Regional disposal regulations must be observed. |
Test certificates
Note
ELAPRO QuickRepair is a fibre-reinforced specialist solution for repair and maintenance work (e.g. in particularly difficult-to-access areas). The application of the system does not comply with the requirements of the German roofing trade regulations or DIN 18531, both of which require application with fleece reinforcement.
| Test certificates | Description |
|---|---|
| Reaction to fire (DIN 4102-1 and EN 13501-1) | Class E |
| External fire performance (DIN 4102-7 and EN 13501-5) | Class BROOF(t1) |
| EMICODE® EC 1PLUS | Licence No. 16005 |
| Ecotoxicologically tested | Test report 04/21102 1a |
ELAPRO QuickRepair is solvent-free in accordance with EMICODE®, certified as “very low emission” with EMICODE® EC 1PLUS and does not require hazard pictograms under the CLP Regulation.